Re: GMC A/C belt tensioner advice [message #371253 is a reply to message #371252] |
Wed, 29 March 2023 18:34 |
rjw
Messages: 697 Registered: September 2005
Karma:
|
Senior Member |
|
|
JohnS wrote on Wed, 29 March 2023 15:50If you got the Sanden adapter from Applied, there is a 3/8 (or maybe 1/2) inch square hole in the forward part of the bracket in which the correct size breaker bar can be inserted. Use a cheater pipe on that if you need more leverage. At least mine is that way.
Thanks for the response.
I don't have the Sanden adapter. My Sanden mounts the same way as the original GM compressor mounted which means no square hole to work with.
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|