GMCforum: GMCnet » Searching for intake and pan, and also a torque converter

Home » Public Forums » GMCnet » Searching for intake and pan, and also a torque converter

Show: Today's Messages :: Polls :: Message Navigator

Re: Searching for intake and pan, and also a torque converter [message #370507 is a reply to message #370500]

Thu, 15 September 2022 21:55

Carl S.

Messages: 4186
Registered: January 2009
Location: Tucson, AZ.

Karma:

Senior Member

Here's the best intake manifold:

https://www.gmcrvparts.com/product-p/455-gm08-006-27.1.htm

A bit spendy though. You might be able to find a stocker from somewhere, in fact I have one, but it has the usual crack between the secondary ports. Not bad, but it's there. If you want to make a trip to Tucson sometime we can work something out.

P.S. We're leaving Monday for a six week trip. Barring all that, find a Toronado in a wrecking yard and strip the needed parts off of that.

Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member

Report message to a moderator

[Message index]

		Searching for intake and pan, and also a torque converter By: fitzmorrispr on Wed, 14 September 2022 02:02
		Re: Searching for intake and pan, and also a torque converter By: JohnL455 on Wed, 14 September 2022 20:51
		Re: Searching for intake and pan, and also a torque converter By: Larry on Thu, 15 September 2022 08:02
		Re: Searching for intake and pan, and also a torque converter By: Carl S. on Thu, 15 September 2022 21:55

Previous Topic:	Alternator to power fuel pump?
Next Topic:	Lenzi mid axle brakes with True-Track

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 11:58:00 CDT 2024

Total time taken to generate the page: 0.01007 seconds