| Re: Help!!!: Bad Rear Suspension Mounting Bracket [message #370449 is a reply to message #370448] |
Tue, 06 September 2022 09:35   |
Tom Katzenberger
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma:
|
Senior Member |
|
|
Road Warrior, Please post your name, We have nothing to hide, everyone in the GMC community is genuine and most all are willing to help. It's much easier to talk to a person with a real name.
The bracket can be fill welded and machined back to a perfect circle. We line bore heavy equipment all the time. BUT! I would simply get one from a donor coach. Note the alignment procedures when re-installing the swing arm and bracket. If the shims are good save them. While the bracket is off I would look at treating the frame with a good zinc coating before re=installing the bracket, I use Master Coat.
Also, check into the modified grease fittings.
This is at least a start. It's really not difficult at all.
Take care and good luck,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
