GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Alternator to power fuel pump?
Re: Alternator to power fuel pump? [message #370442 is a reply to message #370436] Fri, 02 September 2022 06:28 Go to previous messageGo to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
Matt,

Just use the alternator voltage to power the coil of a cube relay. Then pass the power from the battery through the relay to power the pumps. A push-button momentary switch can give you a prime function before starting the engine. If the alternator fails, simply move the power wire from the N/O to the N/C side of the relay.

My coach has Daytime Running Lights which are activated through a relay wired this way.


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Lebanon, TN
Next Topic: Searching for intake and pan, and also a torque converter
Goto Forum:
  


Current Time: Sat Jun 29 05:50:53 CDT 2024

Total time taken to generate the page: 0.01635 seconds