GMCforum: GMCnet » Possibly the Engine is not Running Hot

Home » Public Forums » GMCnet » Possibly the Engine is not Running Hot

Show: Today's Messages :: Polls :: Message Navigator

Re: Possibly the Engine is not Running Hot [message #370353 is a reply to message #370350]

Thu, 11 August 2022 19:42

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Tom,
I wondered where you installed the sensor for the Stewart Warner Gauge so that's why I asked in my previous post. The OEM gauge occupies one hole near the thermostat. The EFI temp sensor occupies the hole previously used for the TVS temperature vacuum switch. So that left me wondering what kind of sensor the Stewart Warner Gauge used.

It all makes perfect sense now.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Possibly the Engine is not Running Hot By: Tom Katzenberger on Thu, 11 August 2022 15:36
		Re: Possibly the Engine is not Running Hot By: Tom Katzenberger on Thu, 11 August 2022 18:39
		Re: Possibly the Engine is not Running Hot By: JohnL455 on Thu, 11 August 2022 19:00
		Re: Possibly the Engine is not Running Hot By: RF_Burns on Thu, 11 August 2022 19:42
		Re: Possibly the Engine is not Running Hot By: Tom Katzenberger on Mon, 15 August 2022 08:39

Previous Topic:	Do we have to bench bleed it?
Next Topic:	Oil Pressure Woes

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 02:13:30 CDT 2024

Total time taken to generate the page: 0.03316 seconds