GMCforum: GMCnet » Onan Starter won't Disengage

Home » Public Forums » GMCnet » Onan Starter won't Disengage

Show: Today's Messages :: Polls :: Message Navigator

Re: Onan Starter won't Disengage [message #369906 is a reply to message #369902]

Thu, 09 June 2022 07:24

Bruce Hart

Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming

Karma:

Senior Member

Removed sheet metal, flywheel and cycled starter drive. Gear cycled in and out with out and any hesitation. Had a bad wear pattern on starter gear so I replaced the starter with a spare I had. Primed carb and fired Onan up. Shut Onan off and tried to restart but had a drag on flywheel and starter would only rotate flywheel a halve revolution before stopping. Checked house battery and got 13.7 volts (plugged into house circuit). I will remove starter and check brushes and clean up the guts and lub bendix drive.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

[Message index]

		Onan Starter won't Disengage By: Bruce Hart on Wed, 08 June 2022 07:27
		Re: Onan Starter won't Disengage By: jhbridges on Wed, 08 June 2022 07:36
		Re: Onan Starter won't Disengage By: Bruce Hart on Wed, 08 June 2022 08:35
		Re: Onan Starter won't Disengage By: boybach on Wed, 08 June 2022 19:19
		Re: Onan Starter won't Disengage By: Bruce Hart on Thu, 09 June 2022 07:24
		Re: Onan Starter won't Disengage By: Bruce Hart on Fri, 10 June 2022 13:06

Previous Topic:	[GMCnet] Olds 455 donor engine
Next Topic:	[GMCnet] Willing to help get the email list going again.

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jul 03 06:32:54 CDT 2024

Total time taken to generate the page: 0.01520 seconds