GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » It was not a cracked intake- it was the carb. now what?
[GMCnet] Re: It was not a cracked intake- it was the carb. now what? [message #369262 is a reply to message #369261] Fri, 25 March 2022 15:26 Go to previous messageGo to previous message
CJV is currently offline  CJV   Canada
Messages: 49
Registered: December 2021
Karma:
Member
I have done the same thing (but not on an engine that sat for that long!!) Does work like a charm.

CJ Vermeulen, Scribbler

----- Original Message -----
From: "Ken Burton"
To: "gmclist"
Sent: Friday, March 25, 2022 1:43:03 PM
Subject: [GMCnet] Re: It was not a cracked intake- it was the carb. now what?

The lazy persons way to try before disassembling the carb. I got this from, Dick Paterson.

I had a GMC w/403 engine that sat for 19 years. I got it to start and barely run (very poorly).
I had disconnected the input hose to fuel pump and ran it on a temporary 5 gallon can of clean gasoline resting on the front bumper. With it running
I switched the fuel input to straight carb cleaner and ran it at about 2000 rpm until the engine died. Then I let it soak for 24 hours.

The next day I reconnected the clean gas can to the fuel pump and cranked, and cranked, and cranked until some of the carb cleaner in the carb was
replaced with fresh gas and the engine restarted. The engine now runs perfectly and I wish that my 455 in my own coach ran and started that well.

Try a 24 hour soaking with a carb full of pure carb cleaner before you tear into the carb.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Best use for space after removing old microwave
Next Topic: Window Seals and re- refurbishment
Goto Forum:
  


Current Time: Fri Jun 21 00:43:19 CDT 2024

Total time taken to generate the page: 0.01396 seconds