GMCforum: GMCnet » belts slip

Home » Public Forums » GMCnet » belts slip

Show: Today's Messages :: Polls :: Message Navigator

Re: belts slip [message #369258 is a reply to message #369250]

Fri, 25 March 2022 10:43

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

jhbridges wrote on Fri, 25 March 2022 08:54

They're the correct belts, and ride slightly proud in the sheaves. I suspect JimH is correct, rep[lacing the dampener pulley looks to e a colossal PIA. Sigh. As far as I can tell, this engine (300 6) was discontinued before the advent of single multi-rib belts.

--johnny

You are correct, I had two of the last of the 300-6s and they were still V-belt.
Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		belts slip By: jhbridges on Wed, 23 March 2022 11:53
		Re: belts slip By: Matt Colie on Wed, 23 March 2022 12:09
		[GMCnet] Re: belts slip By: stu@97381.com, Emery on Wed, 23 March 2022 12:14
		[GMCnet] Re: belts slip By: James Hupy on Wed, 23 March 2022 12:32
		Re: [GMCnet] Re: belts slip By: Larry on Wed, 23 March 2022 18:36
		[GMCnet] Re: belts slip By: powwerjon on Wed, 23 March 2022 23:26
		[GMCnet] Re: belts slip By: jhbridges on Wed, 23 March 2022 12:09
		Re: [GMCnet] Re: belts slip By: Matt Colie on Wed, 23 March 2022 12:57
		Re: belts slip By: jhbridges on Wed, 23 March 2022 12:54
		Re: belts slip By: jhbridges on Fri, 25 March 2022 07:54
		Re: belts slip By: Matt Colie on Fri, 25 March 2022 10:43

Previous Topic:	Bob Drewes' outer CV boot replacement technique
Next Topic:	Best use for space after removing old microwave

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 28 13:51:29 CDT 2024

Total time taken to generate the page: 0.02082 seconds