GMCforum: GMCnet » belts slip

Home » Public Forums » GMCnet » belts slip

Show: Today's Messages :: Polls :: Message Navigator

Re: belts slip [message #369225 is a reply to message #369220]

Wed, 23 March 2022 12:54

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma:

Senior Member

Thanks Ken. I got some of that around here someplace, I'll find it and give it a try.
I believe the real problem is, the alternator is a replacement with a double sheave pulley, only one of which has a belt. If I belt the other one, there won't be sufficient wrap on the power steering pump to spin it. I suspect the replaceme4nt alternator is a higher amppere one than originally fitted and a single belt isn't sufficient to spin it under load.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

[Message index]

		belts slip By: jhbridges on Wed, 23 March 2022 11:53
		Re: belts slip By: Matt Colie on Wed, 23 March 2022 12:09
		[GMCnet] Re: belts slip By: stu@97381.com, Emery on Wed, 23 March 2022 12:14
		[GMCnet] Re: belts slip By: James Hupy on Wed, 23 March 2022 12:32
		Re: [GMCnet] Re: belts slip By: Larry on Wed, 23 March 2022 18:36
		[GMCnet] Re: belts slip By: powwerjon on Wed, 23 March 2022 23:26
		[GMCnet] Re: belts slip By: jhbridges on Wed, 23 March 2022 12:09
		Re: [GMCnet] Re: belts slip By: Matt Colie on Wed, 23 March 2022 12:57
		Re: belts slip By: jhbridges on Wed, 23 March 2022 12:54
		Re: belts slip By: jhbridges on Fri, 25 March 2022 07:54
		Re: belts slip By: Matt Colie on Fri, 25 March 2022 10:43

Previous Topic:	Bob Drewes' outer CV boot replacement technique
Next Topic:	Best use for space after removing old microwave

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jun 28 09:39:27 CDT 2024

Total time taken to generate the page: 0.03495 seconds