GMCforum: GMCnet » Header Gasket

Home » Public Forums » GMCnet » Header Gasket (I need to replace my passenger side header gasket)

Tue, 08 March 2022 13:28

Russell K.

Messages: 178
Registered: October 2016
Location: Dunedin, Florida

Karma:

Senior Member

Update four years later.

Emery, you were right. My Mr. Gasket copper gasket failed after four years. I have replaced it with a Remflex as you mentioned four years ago. Lesson learned the hard way.

http://www.gmcmhphotos.com/photos/header-gasket/p68492-remflex-gasket-replacing-copper-gasket.html

Thanks again for the help.

Russell

1978 Eleganza II, Dunedin, Florida

		Header Gasket By: Russell K. on Mon, 19 February 2018 10:16
		Re: [GMCnet] Header Gasket By: emerystora on Mon, 19 February 2018 10:32
		Re: [GMCnet] Header Gasket By: bhayes on Mon, 19 February 2018 12:00
		Re: [GMCnet] Header Gasket By: Emery Stora on Mon, 19 February 2018 12:23
		Re: [GMCnet] Header Gasket By: Justin Brady on Mon, 19 February 2018 13:10
		Re: [GMCnet] Header Gasket By: powwerjon on Mon, 19 February 2018 13:16
		Re: [GMCnet] Header Gasket - Update By: Russell K. on Mon, 26 February 2018 05:18
		Re: [GMCnet] Header Gasket - Update By: jimk on Mon, 26 February 2018 08:51
		Re: [GMCnet] Header Gasket By: Russell K. on Tue, 08 March 2022 13:28
		[GMCnet] Re: Header Gasket By: stu@97381.com, Emery on Tue, 08 March 2022 13:46
		[GMCnet] Re: Header Gasket By: powwerjon on Tue, 08 March 2022 14:23
		[GMCnet] Re: Header Gasket By: Chris McBride on Tue, 08 March 2022 15:59
		Re: [GMCnet] Header Gasket By: Matt Colie on Tue, 08 March 2022 15:51
		Re: Header Gasket By: shaunone on Mon, 19 February 2018 10:53
		Re: Header Gasket By: Russell K. on Mon, 19 February 2018 12:01
		Re: Header Gasket By: Russell K. on Mon, 19 February 2018 14:50
		Re: [GMCnet] Header Gasket By: jimk on Mon, 19 February 2018 16:51
		Re: Header Gasket By: bhayes on Mon, 19 February 2018 16:54
		Re: [GMCnet] Header Gasket By: jimk on Mon, 19 February 2018 19:13
		Re: [GMCnet] Header Gasket By: Keith V on Tue, 20 February 2018 08:44

Previous Topic:	Should I keep my stock calipers?
Next Topic:	OT, Great reading for lovers of old iron like us

Goto Forum:

Current Time: Fri Sep 27 10:51:27 CDT 2024

Total time taken to generate the page: 0.00771 seconds