GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Grease Vs Silicon Grease Vs Dielectric Grease
[GMCnet] Re: Grease Vs Silicon Grease Vs Dielectric Grease [message #368564 is a reply to message #368563] Tue, 25 January 2022 12:28 Go to previous messageGo to previous message
stu@97381.com, Emery  is currently offline  stu@97381.com, Emery   United States
Messages: 232
Registered: June 2020
Karma:
Senior Member
Thanks, Matt.
Dick Paterson has told me that he uses an electrically conductive grease called OxGard. He asks I said that the module heat sink grease can run down into the two screws and act to insulate it electrically. The module depends on the grounding through those two screws to operate properly. So, he puts OxGard on the screws when he mounts the module.

Emery Stora
77 Kingsley
Frederick CO

> On Jan 25, 2022, at 10:57 AM, Matt Colie wrote:
> also still be enough dielectric to mess
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Quiet Exhaust Question?
Next Topic: Brake Pedal Slowly Goes To The Floor
Goto Forum:
  


Current Time: Thu Jul 04 13:39:13 CDT 2024

Total time taken to generate the page: 0.04034 seconds