Re: [GMCnet] Onan start button on the Gen [message #368557 is a reply to message #368554] |
Tue, 25 January 2022 07:58 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma:
|
Senior Member |
|
|
The main and remote switches are paralleled. I’m guessing you have green corrosion on the Molex in the remote cable behind the generator. If you mark the top row of wires on the gen board and pull the Faston connectors off, you can positively determine if the board is behaving OK or the remote is the problem. If switch on Onan behaves normally, problem is in remote wiring. Inspect and clean Molex or cut, solder and shrink for permanent repair
The first starter symptom you mention sounds like a separate starter drive needing light lubrication issue.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|