GMCforum: GMCnet » Onan Primer Fuse

Home » Public Forums » GMCnet » Onan Primer Fuse

Show: Today's Messages :: Polls :: Message Navigator

Re: Onan Primer Fuse [message #368454 is a reply to message #368451]

Fri, 14 January 2022 12:05

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

Tom,

Your primer circuit needs to be able to power the fuel pump, fuel solenoid (if your have one) and the ignition coil current if the points are closed.

I'm thinking 10 Amps should be plenty.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Onan Primer Fuse By: Tom Katzenberger on Fri, 14 January 2022 11:18
		Re: Onan Primer Fuse By: Tom Katzenberger on Fri, 14 January 2022 11:19
		Re: Onan Primer Fuse By: RF_Burns on Fri, 14 January 2022 12:05
		Re: Onan Primer Fuse By: Tom Katzenberger on Fri, 14 January 2022 12:31
		Re: Onan Primer Fuse By: Ken Burton on Fri, 14 January 2022 17:25
		Re: Onan Primer Fuse By: JohnL455 on Fri, 14 January 2022 17:39
		Re: Onan Primer Fuse By: Matt Colie on Sat, 15 January 2022 09:43
		[GMCnet] Re: Onan Primer Fuse By: jimk on Sat, 15 January 2022 10:16
		Re: Onan Primer Fuse By: Ken Burton on Sat, 15 January 2022 19:41
		Re: Onan Primer Fuse By: Tom Katzenberger on Fri, 14 January 2022 19:24

Previous Topic:	[GMCnet] TZE numbers
Next Topic:	Any fans of the Onan Microlite 2800 generator?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 28 08:05:12 CDT 2024

Total time taken to generate the page: 0.00901 seconds