[GMCnet] Re: Electric Wipers [message #368168 is a reply to message #368152] |
Tue, 21 December 2021 09:40 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Mac,
Call Nick and he will give you the part no. as we supply the same kit
complete with all the blts and nuts.
We find that majority of our customers like all the parts in one kit so
they do not need to run around looking for small parts.
On Tue, Dec 21, 2021 at 7:34 AM Ken Henderson
wrote:
> Mac,
>
> I'm sorry, we don't have the P/N for that motor. Google search for 90-96
> Lumina APV wiper motor yields LOTS of sources and very good prices. We've
> no way of knowing which will return the new Cardone design. Only one
> customer has received it, AFAIK. Based on that one problem, we acted out
> of an abundance of caution, hoping to save everyone trouble by modifying
> the base plates.
>
> Before installing your base plate, try bolting the motor to it, without
> torquing the bolts down. If the motor flange at the gearbox touches the
> base plate before the 3 mounting legs do, you'll need to cut/grind away a
> little of the base plate -- the location will be obvious. The interference
> isn't much, but could cause distortion and eventual problems.
>
> HTH,
>
> Ken H.
>
> On Tue, Dec 21, 2021 at 10:15 AM D C _Mac_ Macdonald
> wrote:
>
>> How about a part number for the Cardone motor, Ken?
>> If I need to "lop" off part of the base plate I bought
>> several months ago, is there a pattern of the new plate
>> which would guide me in the process?
>>
>> D C "Mac" Macdonald
>> Amateur Radio K2GKK
>> Since 30 November '53
>> USAF and FAA, Retired
>> Member GMCMI & Classics
>> Oklahoma City, OK
>> "The Money Pit"
>> TZE166V101966
>> '76 ex-Palm Beach
>> k2gkk + hotmail dot com
>>
>> ________________________________
>> From: Ken Henderson
>> Sent: Tuesday, December 21, 2021 08:55
>> To: GMC Mail List
>> Subject: [GMCnet] Electric Wipers
>>
>> A little more info about the electric wiper kit: Anyone receiving the
>> current production base plate will find that it's not quite like the
> photos
>> on the web site. After the last 94 base plates were cut, we learned that
>> Cardone is now selling NEW motors. But they created a problem -- the
>> motor-gearbox connection is larger than on the OEM motor. That
> connection
>> protrudes beyond the mounting points where the gearbox bolts (3 bolts) to
>> the base plate, keeping the motor from seating properly. To eliminate
> the
>> interference, our base plate manufacturer "lopped off" the right side of
>> the base plate. That eliminated the problem, but left the base plate a
>> little less "aesthetically pleasing" (to the eye of this designer) than
>> before. Sorry 'bout that -- just keep the hood closed! :-)
>>
>> Ken H.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|