Re: [GMCnet] Re: Rear bag inflation/height cut off valves [message #368070 is a reply to message #368060] |
Thu, 16 December 2021 19:01 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
DUH!!!! Why didn't I think of the procedure before.
Ken B.
Keith V wrote on Thu, 16 December 2021 12:40It's easy to set the ride height without the side effects of the height valve time delay and deadband.
It does work best with adjustable links...
All you have to do is:
1. remove the link from the bogie to the height valve. ( the sensor will now be in the middle its deadband )
2. adjust the coach height in manual mode to the middle of the height range.
3. adjust the link so you can reconnect the link without changing the position of the height valve
4. Done
This will eliminate any need to bounce the suspension or wait for the valve to adjust the height.
this is what I did before I got rid of the stock system
Keith Vasilakes
Mounds View MN
76 exRoyale
MicroLevel
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|