GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » EFI and Electronic Ignition Initial Start Up Questions
Re: EFI and Electronic Ignition Initial Start Up Questions [message #367932 is a reply to message #367887] Fri, 10 December 2021 14:16 Go to previous messageGo to previous message
Tom Katzenberger is currently offline  Tom Katzenberger   United States
Messages: 399
Registered: June 2019
Location: Kingsville, MD
Karma:
Senior Member
Guys,

Thank you so much for all the help. Mike I believe you are right. I called Howell and spoke with Troy. Within 5 min he diagnosed and believes it is the coil, but could also be the module based on your observations. I will get a new Cap and Module. Does anyone have a preferred part number that works well with the Howell set up?

I have to run out today, but plan on enjoying the day in the shop tomorrow. I would love to get it running well tomorrow.

thank you again for all the help, it is very much appreciated.

Take care,
Tom K


Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

[Updated on: Fri, 10 December 2021 14:16]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Patterson
Next Topic: Socket size (12 pt) for front axle output hub bolts?
Goto Forum:
  


Current Time: Mon Sep 23 04:52:54 CDT 2024

Total time taken to generate the page: 0.00952 seconds