GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Tips/steps to take before removing intake manifold (Tips/steps to take before removing intake manifold)
Re: Tips/steps to take before removing intake manifold [message #367881 is a reply to message #367683] Wed, 08 December 2021 16:25 Go to previous message
Tilerpep is currently offline  Tilerpep   United States
Messages: 404
Registered: June 2013
Location: Raleigh, NC
Karma:
Senior Member
I built a little gantry between the front seats and used a come-along to aid in removal and replacement.

Pictures, labels, anything that you can group in a little sandwich bag with a label (carb bolts, cruise control, etc.) makes it easier to discern. Especially if you think it will be a two day project, life intervenes, and you come back three weeks later asking "where did this go?"

1975 Glenbrook, 1978 Royale rear bath Raleigh, NC

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Isolator - gift
Next Topic: Carb power piston spring
Goto Forum:
  


Current Time: Sat Sep 28 18:37:30 CDT 2024

Total time taken to generate the page: 0.00644 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software