GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Camber bolts
[GMCnet] Re: Camber bolts [message #367651 is a reply to message #367650] Sun, 21 November 2021 13:40 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
You know why so many of those adjustment bolts are stripped? The alignment
monkeys in commercial shops use air tools on them. Replaced many, many of
them. Good ones are hard to find. Jim K. has the good ones. As does Jim
Bounds. Don't know about Cinnabar. NAPA used to have the real deal, don't
know about lately.
Jim Hupy
Salem, Oregon

On Sun, Nov 21, 2021, 10:57 AM roy keen wrote:

> No problem using Eldorado cam and bolt roy1
> --
> Roy Keen
> Minden,NV
> 76 X Glenbrook
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: what do i need to know about intake corssover ?
Next Topic: What model Onan was the 4.0 for the GMC ?
Goto Forum:
  


Current Time: Tue Jul 02 00:22:37 CDT 2024

Total time taken to generate the page: 0.00727 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software