[GMCnet] Re: Camber bolts [message #367642 is a reply to message #367640] |
Sat, 20 November 2021 19:47 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
SAme as Toronado.
Sometimes Ford will work.
On Sat, Nov 20, 2021 at 5:43 PM Bill Van Vlack
wrote:
> I bought a couple from DJ Eberhardt. He has the Grade8 fine thread
> machined bolt and tall nut. The ones you found in California look like the
> ones
> that Moog is selling. The Moog ones have regular threads, more of the
> shaft machined away, and the discs do not have the radius that allow them
> to sit
> flat on the UCA. The square edge catches on the UCA and cause them to dish
> before they reach the UCA and clamp; sometimes the bolts strip as well.
>
> Maybe you can find an OEM set from a parts coach.
>
> There's some photos in this thread:
> https://www.gmcmotorhome.org/threads/one-ton-front-suspension.1320/#post-10104
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|