| Re: [GMCnet] Camber bolts [message #367640 is a reply to message #367639] |
Sat, 20 November 2021 19:42   |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma:
|
Senior Member |
|
|
I bought a couple from DJ Eberhardt. He has the Grade8 fine thread machined bolt and tall nut. The ones you found in California look like the ones that Moog is selling. The Moog ones have regular threads, more of the shaft machined away, and the discs do not have the radius that allow them to sit flat on the UCA. The square edge catches on the UCA and cause them to dish before they reach the UCA and clamp; sometimes the bolts strip as well.
Maybe you can find an OEM set from a parts coach or, I understand Toronados have the same arrangement.
There's some photos in this thread: https://www.gmcmotorhome.org/threads/one-ton-front-suspension.1320/#post-10104
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
[Updated on: Sat, 20 November 2021 19:43] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
