GMCforum: GMCnet » [GMCnet] sreering

Home » Public Forums » GMCnet » [GMCnet] sreering

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Re: sreering [message #367429 is a reply to message #367425]

Sun, 31 October 2021 11:35

Brian Waddell

Messages: 409
Registered: March 2010

Karma:

Senior Member

yes ..the blue shaft inserted in the outside shaft is tight and slides easily with moly synthetic expensive grease....the upper steering cv joint with the 6 balls was taken apart and well greased with the moly added grease , and turns freely...
Brian
77 ele 455
sperling mb canada
________________________________
From: Dave King
Sent: October 31, 2021 7:06 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: sreering

To Brian with the steering problem. I noted you said yiu used synthetic grease on the steering shaft. Ken Henderson's
"magic" solution was Moly fortified grease. Did you use Moly grease like Valvoline or MolySlip?
--
DAVE KING
lurker, wannabe
Toronto, Ontario, Canada
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Report message to a moderator

[Message index]

		[GMCnet] sreering By: Brian Waddell on Fri, 29 October 2021 12:55
		[GMCnet] Re: sreering By: Jerry Wheeler on Fri, 29 October 2021 13:22
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 13:38
		[GMCnet] Re: sreering By: jimk on Fri, 29 October 2021 16:07
		Re: [GMCnet] Re: sreering By: Ken Burton on Sat, 30 October 2021 00:01
		Re: [GMCnet] Re: sreering By: boybach on Sat, 30 October 2021 01:00
		Re: [GMCnet] Re: sreering By: Ken Burton on Sun, 31 October 2021 04:09
		Re: [GMCnet] Re: sreering By: kingd on Sun, 31 October 2021 08:06
		[GMCnet] Re: sreering By: Brian Waddell on Sun, 31 October 2021 11:35
		[GMCnet] Re: sreering By: Brian Waddell on Sat, 30 October 2021 01:09
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 16:29
		Re: [GMCnet] sreering By: Bill Van Vlack on Fri, 29 October 2021 16:51
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 17:01
		Re: [GMCnet] Re: sreering By: Bill Van Vlack on Fri, 29 October 2021 17:38
		Re: [GMCnet] sreering By: JohnL455 on Sun, 31 October 2021 08:32
		[GMCnet] Re: sreering By: Brian Waddell on Sun, 31 October 2021 11:59
		Re: [GMCnet] Re: sreering By: lqqkatjon on Mon, 01 November 2021 15:46
		[GMCnet] Re: sreering By: Brian Waddell on Mon, 01 November 2021 23:26
		[GMCnet] Re: sreering By: Keith V on Tue, 02 November 2021 11:06
		[GMCnet] Re: sreering By: James Hupy on Tue, 02 November 2021 11:32
		Re: [GMCnet] sreering By: habbyguy on Mon, 01 November 2021 14:49
		Re: [GMCnet] sreering By: boybach on Tue, 02 November 2021 15:03
		Re: [GMCnet] sreering By: Bill Van Vlack on Tue, 02 November 2021 15:50
		[GMCnet] Re: sreering By: James Hupy on Tue, 02 November 2021 15:37
		Re: [GMCnet] sreering By: Ken Burton on Tue, 02 November 2021 16:33
		Re: [GMCnet] sreering By: boybach on Tue, 02 November 2021 17:15

Previous Topic:	[GMCnet] Adam
Next Topic:	Problem with brass body proportioning valve

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Sep 28 17:01:38 CDT 2024

Total time taken to generate the page: 0.00736 seconds