GMCforum: GMCnet » [GMCnet] sreering

Home » Public Forums » GMCnet » [GMCnet] sreering

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Re: sreering [message #367396 is a reply to message #367395]

Fri, 29 October 2021 17:01

Brian Waddell

Messages: 409
Registered: March 2010

Karma:

Senior Member

yes thanks for the advice bill..waiting to find the cost of a new box from jim k.
might take one out of a 76 gmc truck i own here at the farm and try it...this 2.5 turns i have has me wondering where this came from...
Brian Waddell
77 ele 455
sperling mb canada
________________________________
From: Bill Van Vlack
Sent: October 29, 2021 3:51 PM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: sreering

After all you have invested, I'd sure try a new steering box. I assume the rear alignment bent the bogies and/or added shims if they needed it. You
might try Alex Ferrara's steering diagnostic to see if that turns something up.

Some play can come from the intermediate steering column; One can replace it with Borgeson parts (do some research to make sure you'll be happy with
that approach). That would eliminate two points of play (and add back a double-D shaft that might add one back over time.
--
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid
November 2015.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Report message to a moderator

[Message index]

		[GMCnet] sreering By: Brian Waddell on Fri, 29 October 2021 12:55
		[GMCnet] Re: sreering By: Jerry Wheeler on Fri, 29 October 2021 13:22
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 13:38
		[GMCnet] Re: sreering By: jimk on Fri, 29 October 2021 16:07
		Re: [GMCnet] Re: sreering By: Ken Burton on Sat, 30 October 2021 00:01
		Re: [GMCnet] Re: sreering By: boybach on Sat, 30 October 2021 01:00
		Re: [GMCnet] Re: sreering By: Ken Burton on Sun, 31 October 2021 04:09
		Re: [GMCnet] Re: sreering By: kingd on Sun, 31 October 2021 08:06
		[GMCnet] Re: sreering By: Brian Waddell on Sun, 31 October 2021 11:35
		[GMCnet] Re: sreering By: Brian Waddell on Sat, 30 October 2021 01:09
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 16:29
		Re: [GMCnet] sreering By: Bill Van Vlack on Fri, 29 October 2021 16:51
		[GMCnet] Re: sreering By: Brian Waddell on Fri, 29 October 2021 17:01
		Re: [GMCnet] Re: sreering By: Bill Van Vlack on Fri, 29 October 2021 17:38
		Re: [GMCnet] sreering By: JohnL455 on Sun, 31 October 2021 08:32
		[GMCnet] Re: sreering By: Brian Waddell on Sun, 31 October 2021 11:59
		Re: [GMCnet] Re: sreering By: lqqkatjon on Mon, 01 November 2021 15:46
		[GMCnet] Re: sreering By: Brian Waddell on Mon, 01 November 2021 23:26
		[GMCnet] Re: sreering By: Keith V on Tue, 02 November 2021 11:06
		[GMCnet] Re: sreering By: James Hupy on Tue, 02 November 2021 11:32
		Re: [GMCnet] sreering By: habbyguy on Mon, 01 November 2021 14:49
		Re: [GMCnet] sreering By: boybach on Tue, 02 November 2021 15:03
		Re: [GMCnet] sreering By: Bill Van Vlack on Tue, 02 November 2021 15:50
		[GMCnet] Re: sreering By: James Hupy on Tue, 02 November 2021 15:37
		Re: [GMCnet] sreering By: Ken Burton on Tue, 02 November 2021 16:33
		Re: [GMCnet] sreering By: boybach on Tue, 02 November 2021 17:15

Previous Topic:	[GMCnet] Adam
Next Topic:	Problem with brass body proportioning valve

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jun 28 20:34:59 CDT 2024

Total time taken to generate the page: 0.00827 seconds