GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Steering box centering
[GMCnet] Re: Steering box centering [message #367315 is a reply to message #367312] Mon, 25 October 2021 15:51 Go to previous messageGo to previous message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma:
Senior Member
Greg,

I consider the building of swivel plates a waste of time. 2-3 squares of 6
mil plastic under each wheel will serve as well. You won't have any
degrees-of-turn indication, but that's really superfluous anyway: What
you're trying to measure when you turn the wheels each way is the caster.
Since you want all of that you can get, just turn the wheels the same
number of steering wheel rotations each way to get equal maximum caster.

On Mon, Oct 25, 2021 at 12:27 PM Greg Crawford
wrote:

> Thanks, John. I will have to pull the shaft anyway as I need to service
> the CV joint and install new boots. I'm building Ken Henderson's alignment
> jig, and two swivel plates to set the tires on. I should be able to zero
> the steering straight ahead using the laser and proceed with the adjustments
> needed to get everything back to factory.
> --
> Greg Crawford
> KM4ZCR
> Knoxville, TN
>
> "Ruby Sue"
> 1977 Royale
> Rear Bath
> 403 Engine
> American Eagle Wheels
> Early Version Alex Sirum Quad bags
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Tid Bit. The stock fan clutch
Next Topic: WEATHER MAP
Goto Forum:
  


Current Time: Tue Jul 02 21:50:18 CDT 2024

Total time taken to generate the page: 0.01005 seconds