GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Steering box centering
Re: Steering box centering [message #367312 is a reply to message #367287] Mon, 25 October 2021 11:26 Go to previous messageGo to previous message
Greg C. is currently offline  Greg C.   United States
Messages: 224
Registered: October 2019
Location: Knoxville, TN
Karma:
Senior Member
Thanks, John. I will have to pull the shaft anyway as I need to service the CV joint and install new boots. I'm building Ken Henderson's alignment jig, and two swivel plates to set the tires on. I should be able to zero the steering straight ahead using the laser and proceed with the adjustments needed to get everything back to factory.

Greg Crawford KM4ZCR Knoxville, TN "Ruby Sue" 1977 Royale Rear Bath 403 Engine American Eagle Wheels Early Version Alex Sirum Quad bags
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Tid Bit. The stock fan clutch
Next Topic: WEATHER MAP
Goto Forum:
  


Current Time: Tue Jul 02 21:43:16 CDT 2024

Total time taken to generate the page: 0.07152 seconds