GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Steering box centering
Re: Steering box centering [message #367288 is a reply to message #367287] Sat, 23 October 2021 18:43 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
Greg,

Problem 1 - The bolt is no reference. The reference is the FLAT on the input shaft of the steering box.

Get out manual X7525, page 9-39 look at figure. That flat is what has to line up with the machined surface and the steering wheel should be straight ahead at that position. If that isn't right, nothing else matters.

(Should I add BTDT??)

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Tid Bit. The stock fan clutch
Next Topic: WEATHER MAP
Goto Forum:
  


Current Time: Tue Jul 02 23:13:45 CDT 2024

Total time taken to generate the page: 0.01582 seconds