GMCforum: GMCnet » [GMCnet] Caster

Home » Public Forums » GMCnet » [GMCnet] Caster

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Caster [message #367126 is a reply to message #367119]

Sun, 10 October 2021 10:00

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

Do you have the cams set to pull the rear of the arm inboard? Rear offset should have hole near ball joint as you mentioned. If fronts are done the the hole should be inboard to move front of arm outboard and balljoint rearward.
How are you measuring caster?

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		[GMCnet] Caster By: Keith V on Sat, 09 October 2021 16:24
		Re: [GMCnet] Caster By: JohnL455 on Sun, 10 October 2021 10:00
		[GMCnet] Re: Caster By: Keith V on Sun, 10 October 2021 10:14
		[GMCnet] Re: Caster By: James Hupy on Sun, 10 October 2021 11:28
		[GMCnet] Re: Caster By: Keith V on Sun, 10 October 2021 11:33
		Re: [GMCnet] Caster By: JohnL455 on Sun, 10 October 2021 10:44
		[GMCnet] Re: Caster By: Keith V on Sun, 10 October 2021 11:03

Previous Topic:	[GMCnet] Cv boots
Next Topic:	An owner would like a copy of X7525

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 01:42:40 CDT 2024

Total time taken to generate the page: 0.03940 seconds