Victron Combiner Install. [message #367025] |
Sun, 03 October 2021 12:49 |
Tom Katzenberger
Messages: 399 Registered: June 2019 Location: Kingsville, MD
Karma:
|
Senior Member |
|
|
Hello all,
I am installing a Victron Combiner, Cyrix-ct and keeping it attached to the existing isolator.
I have the (2) large brass post on the combiner hooked up to the outside post on the isolator and the #86 ground post connected to ground.
Is post #85 generally ignored and do I need to install 120A fuses on the heavy cables going to the isolator outer terminals?
Thanks in advance,
Tom K.
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition
|
|
|