GMCforum: GMCnet » [GMCnet] Exhaust manifold bolts GM 9440954

Home » Public Forums » GMCnet » [GMCnet] Exhaust manifold bolts GM 9440954

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Exhaust manifold bolts GM 9440954 [message #367003 is a reply to message #367002]

Wed, 29 September 2021 21:26

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

Ken Burton wrote on Wed, 29 September 2021 20:54

Matt,

What grade bolts are you recommending?

I agree anti-seize is a must -

Ken,

Don't go to more than a Gr.2 unless you really need the bolt load. Stay with the Gr.2 because it will give you the least trouble with galling and relaxation.

I have a really bad connection to the local WiFi I hope this makes it.

Matt Colie - Still at Chippewa Falls

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		[GMCnet] Exhaust manifold bolts GM 9440954 By: Bikertrash on Wed, 29 September 2021 16:41
		[GMCnet] Re: Exhaust manifold bolts GM 9440954 By: jimk on Wed, 29 September 2021 17:17
		Re: [GMCnet] Exhaust manifold bolts GM 9440954 By: Matt Colie on Wed, 29 September 2021 19:33
		Re: [GMCnet] Exhaust manifold bolts GM 9440954 By: Ken Burton on Wed, 29 September 2021 19:54
		Re: [GMCnet] Exhaust manifold bolts GM 9440954 By: Matt Colie on Wed, 29 September 2021 21:26
		[GMCnet] Re: Exhaust manifold bolts GM 9440954 By: jimk on Wed, 29 September 2021 21:27
		[GMCnet] Re: Exhaust manifold bolts GM 9440954 By: Bikertrash on Thu, 30 September 2021 07:34
		[GMCnet] Re: Exhaust manifold bolts GM 9440954 By: jimk on Thu, 30 September 2021 23:25

Previous Topic:	Engine trouble
Next Topic:	Victron Combiner Install.

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 03:21:20 CDT 2024

Total time taken to generate the page: 0.01887 seconds