Re: Windshield installation materials [message #366934 is a reply to message #366918] |
Thu, 23 September 2021 00:36 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
Adrien G.
![United States United States](/GMCforum/images/flags/us.png) Messages: 474 Registered: May 2008 Location: Burns Flat, OK 73624
Karma:
|
Senior Member |
|
|
Richard,
A glass installer friend and I removed the windshields for some SMC leaks repair and dash work.
to remove we cut the rubber gasket ( it very old and brittle ), while the dash work was ongoing the glass was being tinted.
The first glass took about an hour with some frustrations , to install DO NOT start at the center and work out, for us
it was real easy when we switched and started on the outside and work to center.
Since you want to save the gasket, you might conceder removing from center. I have not seen anyone else do this work, going
only by our experience. Good luck.
Adrien & Jenny Genesoto
75 Glenbrook (26-3) Mods LS3.70 FD / Reaction Sys / 80mm Front&Intermidiate / Hydroboost / 16" Tires / Frame Rebuild / Interior Rebuild
Yuba City,Ca. Text 530-nine-3-three-3-nine-nine-6
|
|
|