GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Exhaust bang bang bang (going down steep grades)
[GMCnet] Re: Exhaust bang bang bang [message #366778 is a reply to message #366776] Tue, 14 September 2021 16:38 Go to previous messageGo to previous message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma:
Senior Member
Mine has never done that with or without a carb with headers and 3" exhaust with a single rumbly flowmaster 80 in the back
Popping would seem to indicate unburned fuel in the exhaust. How is that happening?
________________________________
From: John R.Lebetski
Sent: Tuesday, September 14, 2021 3:27 PM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: Exhaust bang bang bang

Mine will “burble” during long engine braking, but I have my exact GM copy exhaust system installed so it is barely noticeable.
I suspect your idle mixture may be adding extra fuel causing this to be more pronounced. If you have 3” stainless this may exaggerate it. Correct
mixture is balanced best idle just at the lean drop edge. “Emissions” setting would be 25 RPM lean drop per side to get 50 RPM lean drop.
--
John Lebetski
Woodstock, IL
77 Eleganza II
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:



Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Axle Rebuild
Next Topic: Radiator cooling fan
Goto Forum:
  


Current Time: Tue Jul 02 02:25:09 CDT 2024

Total time taken to generate the page: 0.10981 seconds