[GMCnet] Re: Leigh Harrison Air Bag (Spring) part number [message #366660 is a reply to message #366657] |
Thu, 09 September 2021 22:24 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
When we designed the QuadraBag for Jim Bounds of COOP ,
We took the Ken Rose's design and moved the bags up higher and larger bag.
Result was that the handling remained the same as the Harrison, but with a
smoother ride.
Also we operate on 80psi vs 100 for the Harrison and handle the additional
weight that JimBounds wanted.
On Thu, Sep 9, 2021 at 7:40 PM Larry wrote:
> RoadWarrior wrote on Thu, 09 September 2021 12:06
>> What do you think about using the "7659" in the firestone brand? I just
> looked and "Airbagit" no longer carys the "7659" in whatever brand that
>> was. Its cracking may have just been from inferior metal (like all the
> Chineese wheel bearings).
>
> I actually went through several sets of the Airbagit bags. After sending
> them pics of the application I was using, they finally relented that the
> bags
> were designed for a straight push, instead of the minor twist push that
> the GMC Harrison setup gave. So, they admitted that the bags would not work
> in
> our situation. Would not take the bags back nor give me my money back on
> them, even though they said on first inquiry, seeing pics of the
> application,
> and said the bags would work.
>
> Personally I would not hesitate to use the Firestone 7659. They have
> steel end plates and are slightly bigger than the original, making pressures
> slightly lower for the same carrying height. JMHO
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|