GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Dipstick tube broke (Dipstick tube broke)
[GMCnet] Re: Dipstick tube broke [message #366281 is a reply to message #366278] Sun, 22 August 2021 16:04 Go to previous messageGo to previous message
jimk is currently offline  jimk   United States
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
Senior Member
Tom.
It is on the driver side and close to the bottom pan.
Just a quick call to us would get you info fast.
Also visit our web site.


On Sun, Aug 22, 2021 at 1:12 PM Thomas Burden
wrote:

> Ken,
> Which side of the block is yours located on looking at the front of the
> engine, transmission dipstick side or the alternator side? I have been
> hunting for the oil dipstick ever since I bought my 73’ & cannot find it?
> Thanks, Thomas
>
> Sent from my iPhone
>
>> On Aug 22, 2021, at 3:32 PM, Emery Stora via Gmclist gmclist@list.gmcnet.org> wrote:
>>
>> Ken
>> One way that should work is to get a long bolt that will just slide into
> the broken stub head first. Then the head of the bolt can be caught on the
> inside of the tube. Clamp on a vice-grip and hammer up on it.
>> When you have it part way up you can then slide a larger bolt into the
> tube and clamp it down with the vice grip and hammer it up to remove the
> stub.
>>
>> Emery Stora
>> 77 Kingsley
>> Frederick, CO
>>
>>
>>
>>> On Aug 22, 2021, at 12:42 PM, Ken Shaffer wrote:
>>>
>>> My oil dipstick tube rusted and broke behind exhaust manifold. I
> removed manifold and carefully worked on getting the rest of the tube out
> so that I
>>> could replace it…. Well… I failed miserably! Now what? Does anyone
> have any suggestions besides pulling everything off the bottom to get oil
> pan
>>> off.
>>> It is broke off clean with block. 🥴
>>> Any suggestions?
>>>
>>> --
>>> Ken Shaffer
>>> Marion Iowa
>>> 73 Canyon Lands, 455, Micro-level, Alum radiator, Alcoa wheels, Lenzi
> hubs/bearings, Howell EFI/EBL, Rostra Cruise, Custom interior
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>


--
Jim Kanomata ASE
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:


Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Micro Level ride control. Opened new twist to ground clearance.
Next Topic: [GMCnet] EFI conversion
Goto Forum:
  


Current Time: Mon Jul 01 18:04:26 CDT 2024

Total time taken to generate the page: 0.01586 seconds