GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Lower Steering Shaft Removal
Re: Lower Steering Shaft Removal [message #365995 is a reply to message #344914] Mon, 09 August 2021 00:12 Go to previous messageGo to previous message
EricWaS is currently offline  EricWaS   United States
Messages: 7
Registered: August 2020
Location: Spokane, WA
Karma:
Junior Member
It was touched on, but not discussed... if the steering box is set at the high point, and the steering wheel is straight ahead and the clamp bolts are positioned as they should be but the cv joint bolt holes do not line up, how does one adjust it? My coach wasn't right when I got it, and I am trying to get it right. How and what do I index so that it is right? As it is right now, the cv joint screw holes are off about 30 degrees. Anyone? Thank you!
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Opinions Wanted on Transmission Filter
Next Topic: Limited Slip Transaxle
Goto Forum:
  


Current Time: Sat Oct 05 06:31:32 CDT 2024

Total time taken to generate the page: 0.00725 seconds