GMCforum: GMCnet » Problem with brass body proportioning valve

Home » Public Forums » GMCnet » Problem with brass body proportioning valve (Read about it in Winter 2021 Vintage RVing)

Show: Today's Messages :: Polls :: Message Navigator

Re: Problem with brass body proportioning valve [message #365769 is a reply to message #365293]

Thu, 29 July 2021 20:53

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Tom,

I purchased the valve from Jim K. and completed the modification. Is this valve and modification not acceptable? I have an original steel valve with 8,000 mile, but it has been in storage for 40 years. Is the steel valve worthy. I have converted to 6 wheel disc system which is sold by Jim at Applied. I am simply trying to make a safer brake system.

Thanks,
Tom K.

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		Problem with brass body proportioning valve By: Matt Colie on Fri, 09 July 2021 07:59
		Re: Problem with brass body proportioning valve By: JohnL455 on Fri, 09 July 2021 09:22
		Re: Problem with brass body proportioning valve By: Matt Colie on Fri, 09 July 2021 11:07
		Re: Problem with brass body proportioning valve By: JohnL455 on Fri, 09 July 2021 14:07
		Re: Problem with brass body proportioning valve By: blur911 on Fri, 09 July 2021 15:00
		Re: Problem with brass body proportioning valve By: JohnL455 on Fri, 09 July 2021 17:40
		Re: Problem with brass body proportioning valve By: Green machine on Fri, 09 July 2021 23:35
		Re: Problem with brass body proportioning valve By: ebyker on Sat, 10 July 2021 07:43
		Re: Problem with brass body proportioning valve By: MikeB on Sat, 10 July 2021 10:01
		[GMCnet] Re: Problem with brass body proportioning valve By: Thomas Pryor on Sat, 10 July 2021 11:08
		Re: Problem with brass body proportioning valve By: Greg C. on Sat, 10 July 2021 19:05
		Re: Problem with brass body proportioning valve By: Larry on Sat, 10 July 2021 20:24
		Re: Problem with brass body proportioning valve By: Tom Katzenberger on Sat, 10 July 2021 19:38
		Re: Problem with brass body proportioning valve By: Tom Katzenberger on Sat, 10 July 2021 19:40
		Re: Problem with brass body proportioning valve By: Matt Colie on Sun, 11 July 2021 08:15
		Re: Problem with brass body proportioning valve By: Tom Katzenberger on Sun, 11 July 2021 11:16
		Re: Problem with brass body proportioning valve By: JohnL455 on Sun, 11 July 2021 13:33
		Re: Problem with brass body proportioning valve By: Greg C. on Sun, 11 July 2021 19:29
		Re: Problem with brass body proportioning valve By: Bill Van Vlack on Sun, 11 July 2021 23:24
		[GMCnet] Re: Problem with brass body proportioning valve By: James Hupy on Sun, 11 July 2021 23:33
		Re: [GMCnet] Re: Problem with brass body proportioning valve By: Bill Van Vlack on Mon, 12 July 2021 10:34
		[GMCnet] Re: Problem with brass body proportioning valve By: James Hupy on Mon, 12 July 2021 10:50
		Re: Problem with brass body proportioning valve By: wally on Mon, 12 July 2021 11:55
		Re: Problem with brass body proportioning valve By: Matt Colie on Mon, 12 July 2021 19:18
		Re: Problem with brass body proportioning valve By: TR 1 on Mon, 12 July 2021 12:44
		Re: Problem with brass body proportioning valve By: Bill Van Vlack on Mon, 12 July 2021 13:31
		Re: Problem with brass body proportioning valve By: TR 1 on Mon, 12 July 2021 14:34
		Re: Problem with brass body proportioning valve By: Bill Van Vlack on Tue, 13 July 2021 10:14
		Re: Problem with brass body proportioning valve By: Greg C. on Mon, 12 July 2021 17:02
		Re: Problem with brass body proportioning valve By: JohnL455 on Mon, 12 July 2021 17:12
		Re: Problem with brass body proportioning valve By: Greg C. on Mon, 12 July 2021 17:40
		[GMCnet] Re: Problem with brass body proportioning valve By: Thomas Pryor on Thu, 29 July 2021 14:40
		[GMCnet] Re: Problem with brass body proportioning valve By: Billy Massey on Thu, 29 July 2021 15:30
		Re: [GMCnet] Re: Problem with brass body proportioning valve By: Matt Colie on Thu, 29 July 2021 16:39
		Re: Problem with brass body proportioning valve By: JohnL455 on Thu, 29 July 2021 18:57
		Re: Problem with brass body proportioning valve By: Tom Katzenberger on Thu, 29 July 2021 20:53
		Re: Problem with brass body proportioning valve By: Matt Colie on Thu, 29 July 2021 21:55
		Re: Problem with brass body proportioning valve By: Jp Benson on Sat, 31 July 2021 21:19
		Re: Problem with brass body proportioning valve By: Bill Van Vlack on Sun, 01 August 2021 13:10
		Re: Problem with brass body proportioning valve By: Jp Benson on Sun, 01 August 2021 17:24
		Re: Problem with brass body proportioning valve By: Larry on Sun, 01 August 2021 13:03
		Re: Problem with brass body proportioning valve By: Matt Colie on Sun, 01 August 2021 14:37
		Re: Problem with brass body proportioning valve By: Larry on Sun, 01 August 2021 15:06
		Re: Problem with brass body proportioning valve By: blur911 on Sun, 01 August 2021 16:00
		Re: Problem with brass body proportioning valve By: Thomas Pryor on Fri, 17 September 2021 12:38
		Re: Problem with brass body proportioning valve By: Larry on Fri, 17 September 2021 17:49
		Re: Problem with brass body proportioning valve By: blur911 on Sun, 10 October 2021 13:23
		Re: Problem with brass body proportioning valve By: Russell K. on Mon, 11 October 2021 13:14
		[GMCnet] Re: Problem with brass body proportioning valve By: stu@97381.com, Emery on Mon, 11 October 2021 14:43
		[GMCnet] Re: Problem with brass body proportioning valve By: stu@97381.com, Emery on Mon, 11 October 2021 15:55
		[GMCnet] Re: Problem with brass body proportioning valve By: jimk on Mon, 11 October 2021 20:17
		Re: [GMCnet] Re: Problem with brass body proportioning valve By: blur911 on Wed, 03 November 2021 14:39
		[GMCnet] Re: Problem with brass body proportioning valve By: jimk on Wed, 03 November 2021 15:26
		[GMCnet] Re: Problem with brass body proportioning valve By: Thomas Pryor on Tue, 12 October 2021 12:20
		Re: Problem with brass body proportioning valve By: ebyker on Tue, 12 October 2021 14:59

Previous Topic:	[GMCnet] sreering
Next Topic:	[GMCnet] Winterizing Options

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jun 30 03:51:22 CDT 2024

Total time taken to generate the page: 1.28864 seconds