GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Cam sprocket - plastic or not?
[GMCnet] Re: Cam sprocket - plastic or not? [message #365428 is a reply to message #365426] Wed, 14 July 2021 13:06 Go to previous messageGo to previous message
powwerjon is currently offline  powwerjon   United States
Messages: 849
Registered: March 2013
Karma:
Senior Member
Not aluminum, It is steel. See below

Cloyes part no. is 9-3113

Summit part no. is MAH-9-3113
https://www.summitracing.com/parts/mah-93113

Jegs part no 220-9-3113
https://www.jegs.com/i/Cloyes/220/9-3113.010/10002/-1

On Ebay

https://tinyurl.com/537nxa84

https://tinyurl.com/w8nm2smh

https://tinyurl.com/94tksdn3

https://tinyurl.com/ybc54xst

https://tinyurl.com/yru97k9v

https://tinyurl.com/yru97k9v

These are all from various Ebay suppliers

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 29.5’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan


> On Jul 14, 2021, at 12:29 PM, Ken Harland wrote:
>
> Thanks all, as I suspected, nylon over aluminum. I'll let him know.
>
> --
> 1978 Eleganza II
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Head Bolt Location
Next Topic: Play-doh in the lighter socket
Goto Forum:
  


Current Time: Thu Jul 11 18:20:04 CDT 2024

Total time taken to generate the page: 0.01195 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software