GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Cam sprocket - plastic or not?
Re: Cam sprocket - plastic or not? [message #365422 is a reply to message #365416] Wed, 14 July 2021 08:17 Go to previous messageGo to previous message
Matt Colie is currently offline  Matt Colie   Canada
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
Senior Member
RF_Burns wrote on Tue, 13 July 2021 22:19
I believe (well pretty sure) the OEM cam sprocket was nylon. Get a double roller chain and sprocket to replace it.
If he does get the double rolled, have him be sure to check that it is installed on time. The double roller are speed parts and so come with keyways for +&-4°. He needs to know where he wants it to end up.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Head Bolt Location
Next Topic: Play-doh in the lighter socket
Goto Forum:
  


Current Time: Sat Oct 05 02:56:09 CDT 2024

Total time taken to generate the page: 0.00729 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software