GMCforum: GMCnet » thanks Dave Lenzi

Home » Public Forums » GMCnet » thanks Dave Lenzi (brakes)

Show: Today's Messages :: Polls :: Message Navigator

Re: thanks Dave Lenzi [message #365100 is a reply to message #365098]

Tue, 29 June 2021 08:59

Tom Katzenberger

Messages: 399
Registered: June 2019
Location: Kingsville, MD

Karma:

Senior Member

Does the new combination valve sold by Applied correct for this or should it be modified as well?

Tom & Oki Katzenberger, Kingsville, Maryland, 1977 23' Birchaven, 455 C.I.D., Micro Level, Howell EBL-EFI Spark Control, Macerator, York Air Compressor, 6 Wheel Disc, Quadra Bag, Onan W/Bovee Ignition

Report message to a moderator

[Message index]

		thanks Dave Lenzi By: ebyker on Tue, 29 June 2021 08:57
		Re: thanks Dave Lenzi By: Tom Katzenberger on Tue, 29 June 2021 08:59
		Re: thanks Dave Lenzi By: Bill Van Vlack on Tue, 29 June 2021 09:26
		Re: thanks Dave Lenzi By: ebyker on Tue, 29 June 2021 10:23
		Re: thanks Dave Lenzi By: TR 1 on Tue, 29 June 2021 10:32
		Re: thanks Dave Lenzi By: ebyker on Tue, 29 June 2021 11:21
		Re: thanks Dave Lenzi By: TR 1 on Tue, 29 June 2021 12:58
		Re: thanks Dave Lenzi By: Christo on Tue, 29 June 2021 13:06
		[GMCnet] Re: thanks Dave Lenzi By: James Hupy on Tue, 29 June 2021 12:56
		[GMCnet] Re: thanks Dave Lenzi By: Ken Henderson on Tue, 29 June 2021 13:04
		Re: thanks Dave Lenzi By: RF_Burns on Tue, 29 June 2021 14:08
		Re: thanks Dave Lenzi By: 6cuda6 on Tue, 29 June 2021 15:18

Previous Topic:	Sagging Cockpit interior Head Liner
Next Topic:	Front rubber brake line length?

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Jul 06 15:54:03 CDT 2024

Total time taken to generate the page: 0.01673 seconds