GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » P30 Master Cylinder Rear Bailing Ring Problem
[GMCnet] Re: P30 Master Cylinder Rear Bailing Ring Problem [message #365012 is a reply to message #365009] Sat, 26 June 2021 08:52 Go to previous messageGo to previous message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma:
Senior Member
If you have to frequently top off any master cylinder, you have problems
elsewhere that nee attention. Like worn brake pads and/or shoes, bad hoses,
or leaks in the brake system somewhere. That is a closed and sealed system.
Fluid cannot just disappear without a fault someplace. Keep looking. Your
solution is out there.
Jim Hupy
Salem,Oregon

On Sat, Jun 26, 2021, 3:14 AM Russell Mehlenbacher
wrote:

> I fill my P30 with a laboratory wash bottle. Search the internet, Amazon
> has rather a lot.
> I also use one to top off batteries.
> A potential down side is they are somewhat subject to drips from changes
> in atmospheric pressure. I minimize that by removing the spout and letting
> it
> drain before storage.
>
> Russ
> --
> Russ & Linda Mehlenbacher
> Rochester Hills, Michigan
> '76 Eleganza
> '74 Sequoia
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Second Starter Motor Burned out
Next Topic: Air con coolant
Goto Forum:
  


Current Time: Sat Jul 06 15:40:53 CDT 2024

Total time taken to generate the page: 0.00876 seconds