GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » P30 Master Cylinder Rear Bailing Ring Problem
Re: P30 Master Cylinder Rear Bailing Ring Problem [message #364996 is a reply to message #364995] Fri, 25 June 2021 14:46 Go to previous messageGo to previous message
Christo is currently offline  Christo   United States
Messages: 109
Registered: April 2019
Location: Weymouth, MA
Karma:
Senior Member
Same here, pop one of the legs out to remove, then pull it back into place with a pair of channel pliers. I use a turkey baster with a piece of clear tubing stuck in the end to top up the reservoirs.

Christo Darsch
GMC Nor'easters
1977 Eleganza II - "The Komet"
3.50 Power Drive, Disc Brakes, Alcoas
Weymouth, MA

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Second Starter Motor Burned out
Next Topic: Air con coolant
Goto Forum:
  


Current Time: Sat Jul 06 16:37:06 CDT 2024

Total time taken to generate the page: 0.01539 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software