GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » P30 Master Cylinder Rear Bailing Ring Problem
Re: P30 Master Cylinder Rear Bailing Ring Problem [message #364991 is a reply to message #364990] Fri, 25 June 2021 12:42 Go to previous messageGo to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
I used a screwdriver to pry one of the legs out of the socket. Its not elegant but it works. Putting it back on isn't so hard either, if you hold your tongue right!

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Second Starter Motor Burned out
Next Topic: Air con coolant
Goto Forum:
  


Current Time: Sat Jul 06 15:56:24 CDT 2024

Total time taken to generate the page: 0.00531 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software