GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Brake Bleeding 101
Re: [GMCnet] Brake Bleeding 101 [message #364961 is a reply to message #295436] Thu, 24 June 2021 16:14 Go to previous messageGo to previous message
Green machine is currently offline  Green machine   Canada
Messages: 184
Registered: July 2019
Location: North Vancouver BC
Karma:
Senior Member
Such a timely post. I've been restoring my coach for almost 2 years now and intended to take it on its maiden voyage last week. One of the last things I had to do (mechanical wise) was to bleed the brakes after I replaced a blown out brake line. Try as I might, I could not get a stiff pedal and sufficient braking; even with Jim's bleeder. I was faulting a bad MC (even though it's new) or a poor bench bleed. But now I see lots of new tips here I will employ this weekend. Thanks OP. Great thread.

Shawn


Shawn Harris North Vancouver, Canada 1977 Palm Beach 403
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Issue with rough idle and stalling with electric fuel pump
Next Topic: [GMCnet] Second Starter Motor Burned out
Goto Forum:
  


Current Time: Mon Sep 30 16:17:39 CDT 2024

Total time taken to generate the page: 0.01246 seconds