GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Brake Bleeding 101
Re: [GMCnet] Brake Bleeding 101 [message #364953 is a reply to message #364946] Thu, 24 June 2021 12:48 Go to previous messageGo to previous message
Christo is currently offline  Christo   United States
Messages: 109
Registered: April 2019
Location: Weymouth, MA
Karma:
Senior Member
Try pushing harder. When I recently did my 34mm MC from Dave Lenzi, I ran into resistance after depressing the plunger about 3/4". It turns out that the full travel is about twice that, so once I overcame the additional resistance of the second spring everything was fine.

Christo Darsch
GMC Nor'easters
1977 Eleganza II - "The Komet"
3.50 Power Drive, Disc Brakes, Alcoas
Weymouth, MA
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Issue with rough idle and stalling with electric fuel pump
Next Topic: [GMCnet] Second Starter Motor Burned out
Goto Forum:
  


Current Time: Tue Jul 02 00:37:10 CDT 2024

Total time taken to generate the page: 0.01309 seconds