GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » Tips for installing engine vents (Tips for installing engine vents)
Re: [GMCnet] Re: Tips for installing engine vents [message #364672 is a reply to message #364671] Sun, 13 June 2021 19:19 Go to previous messageGo to previous message
mghamms is currently offline  mghamms   United States
Messages: 466
Registered: March 2016
Location: Ware, Massachusetts
Karma:
Senior Member
I would drill a hole, or two, somewhere in the center to probe and double check that the placement is good.
Best to start with a small hole first. easy to make it bigger and modify the location.

1977 Kingsley 455 as stock as it gets except lots of Ragusa parts

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Belt changing
Next Topic: [GMCnet] "Stickum" to Hold Rubber Strip on Side Trim
Goto Forum:
  


Current Time: Sat Oct 05 06:38:22 CDT 2024

Total time taken to generate the page: 0.00756 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software