Re: [GMCnet] Re: Guess what’s coming to Chez Denney [message #362967 is a reply to message #362963] |
Tue, 23 March 2021 08:44 |
|
RF_Burns
Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma:
|
Senior Member |
|
|
Rick,
Congratulations on your shop build getting started. You have put some good thought into what you want with the KenHen pit etc.
For my heat, I put in-floor heating plus a gas space heater. This allows me to have a warm floor (about 18-20C) which gives background heat to keep the shop at about 10C in the dead of winter. When I want spend a winter day in the shop (which has been every day this year) I can turn up the space heater and bring the shop up to 18-20C in less than 20 minutes. By setting the space heater to ~6C, it provides a backup for the in-floor heat.
I had fluorescent lighting originally installed, but have added LED here and there. The LED are so much nicer and brighter, they make the fluorescent look dim. I'll be converting the fluorescent fixtures to LED soon. Don't forget a couple outside RV plug-ins for visitors!
Take lots of construction pictures so you can see where things are behind the walls in the future! And of course post some for the rest of us!
http://www.gmcmhphotos.com/photos/g6483-the-murray-gets-a-home.html
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|