GMCforum: GMCnet » Question for a "friend"

Home » Public Forums » GMCnet » Question for a "friend"

Show: Today's Messages :: Polls :: Message Navigator

Re: Question for a "friend" [message #362889 is a reply to message #362884]

Wed, 17 March 2021 08:33

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

Note that when installing the 2 1/4” seals between the manifold and exhaust pipe that this joint flexes under spring tension. You must play with the pipe to get it parallel to the manifold exit. You may have to rotate it where it enters the muffler inlet. If not parallel, the seals may start to leak in a short time.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		Question for a "friend" By: LNelson on Wed, 17 March 2021 07:07
		[GMCnet] Re: Question for a "friend" By: Dave Stragand on Wed, 17 March 2021 07:20
		[GMCnet] Re: Question for a "friend" By: Ken Henderson on Wed, 17 March 2021 07:49
		Re: Question for a "friend" By: JohnL455 on Wed, 17 March 2021 08:24
		Re: Question for a "friend" By: JohnL455 on Wed, 17 March 2021 08:33
		Re: Question for a "friend" By: Matt Colie on Wed, 17 March 2021 08:44
		Re: Question for a "friend" By: LNelson on Wed, 17 March 2021 08:56
		Re: Question for a "friend" By: Matt Colie on Wed, 17 March 2021 13:04
		Re: Question for a "friend" By: rvanwin on Wed, 17 March 2021 09:14
		Re: Question for a "friend" By: LNelson on Thu, 18 March 2021 07:30

Previous Topic:	Another Canadian new owner of a GMC Motorhome
Next Topic:	Turn signal replacement

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 07:55:04 CDT 2024

Total time taken to generate the page: 0.04920 seconds