[GMCnet] Re: EFI [message #362851 is a reply to message #362848] |
Mon, 15 March 2021 23:48 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Some people have raised the body above the frame 1-2 inch.
On Mon, Mar 15, 2021 at 9:15 PM Jim Kanomata wrote:
> Our kits use a thinner base plate and a ring adapter under the Air Cleaner.
> If your friend has a Hi Rise intake, he must raise the center of the dog
> house.
>
> On Mon, Mar 15, 2021 at 6:29 PM Ken Henderson
> wrote:
>
>> Dean,
>>
>> I don't understand the problem: IIRC, when I had the 455 with OEM
>> manifold, the Holly Throttle Body and later the GM TB, was no taller than
>> the Quadrajet and so did not require raising the hatch cover.
>>
>> Even with the taller Cad500 installed with the GM TB, I've only had to
>> slightly raise about a 1/2" high aluminum dome over the cutaway plywood
>> hatch cover.
>>
>> Even when I bought the GMC with a Quadrajet on the 455 with an Edelbrock
>> Performer manifold, the hatch was raised by only about 4". I have to
>> wonder what manifold your friend is using that's even taller than that
>> one.
>>
>> Ken H.
>>
>>
>> On Mon, Mar 15, 2021 at 7:41 PM Hanson Email
>> wrote:
>>
>>> Anyone know of a very low profile intake manifold for an EFI that will
>> keep
>>> the doghouse from raising its ugly head? Right now the cover raise is
>> about
>>> 6 inches. Thank you PO.
>>>
>>> This is for a friend as I am a quad guy.
>>>
>>>
>>>
>>> Dean The Resourceful Norse Hanson
>>>
>>> 75 Avion
>>>
>>> 73 Painted Desert.
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.gmcrvparts.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|