| [GMCnet] Re: EFI [message #362848 is a reply to message #362841] |
Mon, 15 March 2021 23:15   |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Our kits use a thinner base plate and a ring adapter under the Air Cleaner.
If your friend has a Hi Rise intake, he must raise the center of the dog
house.
On Mon, Mar 15, 2021 at 6:29 PM Ken Henderson
wrote:
> Dean,
>
> I don't understand the problem: IIRC, when I had the 455 with OEM
> manifold, the Holly Throttle Body and later the GM TB, was no taller than
> the Quadrajet and so did not require raising the hatch cover.
>
> Even with the taller Cad500 installed with the GM TB, I've only had to
> slightly raise about a 1/2" high aluminum dome over the cutaway plywood
> hatch cover.
>
> Even when I bought the GMC with a Quadrajet on the 455 with an Edelbrock
> Performer manifold, the hatch was raised by only about 4". I have to
> wonder what manifold your friend is using that's even taller than that one.
>
> Ken H.
>
>
> On Mon, Mar 15, 2021 at 7:41 PM Hanson Email wrote:
>
>> Anyone know of a very low profile intake manifold for an EFI that will
> keep
>> the doghouse from raising its ugly head? Right now the cover raise is
> about
>> 6 inches. Thank you PO.
>>
>> This is for a friend as I am a quad guy.
>>
>>
>>
>> Dean The Resourceful Norse Hanson
>>
>> 75 Avion
>>
>> 73 Painted Desert.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.gmcrvparts.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
