GMCforum: GMCnet » Wheel Nuts

Home » Public Forums » GMCnet » Wheel Nuts (All same size? )

Show: Today's Messages :: Polls :: Message Navigator

Re: Wheel Nuts [message #362826 is a reply to message #362825]

Sun, 14 March 2021 22:08

dsmithy

Messages: 210
Registered: July 2012
Location: Lincoln Nebraska

Karma:

Senior Member

Larry,
If they are stock steel wheel lug nuts the ION lug nut wrench probably will not fit. I just bought a set of ION's from JimK (Love them) but the lug nuts are a smaller size than my old 16.5 standard wheel lug nuts. I called Nick to confirm the recommended torque on the ION lug nuts and it is 145 foot/lbs. I always needed a 3 foot cheeter bar to break loose the steel wheel lug nuts, but my torque wrench is enough for the ION's. HTH
Doug

Douglas & Virginia Smith, dsmithy18 at gmail, Lincoln Nebraska, ’73 “Sequoia” since ‘95: "Wanabizo"; Quadrabag/6 wheel disks/3:70 final/Paterson QuadraJet/Thorley’s/Alloy wheels/Sundry other

Report message to a moderator

[Message index]

		Wheel Nuts By: boybach on Sun, 14 March 2021 22:01
		Re: Wheel Nuts By: dsmithy on Sun, 14 March 2021 22:08
		[GMCnet] Re: Wheel Nuts By: jimk on Sun, 14 March 2021 22:19
		Re: Wheel Nuts By: lqqkatjon on Mon, 15 March 2021 11:09
		Re: Wheel Nuts By: boybach on Mon, 15 March 2021 13:25
		Re: Wheel Nuts By: JohnL455 on Mon, 15 March 2021 17:34
		Re: Wheel Nuts By: JohnL455 on Mon, 15 March 2021 17:48
		Re: Wheel Nuts By: Matt Colie on Mon, 15 March 2021 18:54
		Re: Wheel Nuts By: boybach on Mon, 15 March 2021 19:46
		Re: Wheel Nuts By: Harry on Mon, 15 March 2021 23:18
		Re: Wheel Nuts By: boybach on Tue, 16 March 2021 02:16

Previous Topic:	[GMCnet] EFI
Next Topic:	Tranny fluid

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 02:47:00 CDT 2024

Total time taken to generate the page: 0.01086 seconds