GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » 1 Ton Conversion Question
Re: 1 Ton Conversion Question [message #362486 is a reply to message #362483] Mon, 22 February 2021 10:58 Go to previous messageGo to previous message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma:
Senior Member
Tom Katzenberger wrote on Mon, 22 February 2021 10:36
Ken,

Is there a kit for the complete poly bushing replacement or did you order separately?

I am looking into Jim and Manny's kit. Are they both Hublers design? I also found that my donor coach has grease zerks in the knuckles which may change things a bit.

Thank everyone for your input. The beautiful thing about these coaches and there owners is that no two are alike. None all wrong or none all right, but all heading in the path of their owners dreams.

Thanks again,
Tom
The knuckles on the donor coach have zirks? If you know the previous owner, contact Dave L to see if those are his rebuilds. If they are, IMO this is a no brainer. Swap them over to your rebuild. Grease them up good with Mobil 1 grease and drive it. With a greasing every 25K or so, they will probably outlast you and Oki. JWIT


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.

[Updated on: Mon, 22 February 2021 10:59]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Double Roller Timing Chain Kit with Gaskets?
Next Topic: [GMCnet] Air ride
Goto Forum:
  


Current Time: Sun Oct 06 01:10:47 CDT 2024

Total time taken to generate the page: 0.00658 seconds