GMCforum: GMCnet » Piano Hinge on Engine Hatch

Home » Public Forums » GMCnet » Piano Hinge on Engine Hatch (Has anyone cut the engine hatch into two parts?)

Show: Today's Messages :: Polls :: Message Navigator

Re: Piano Hinge on Engine Hatch [message #361958 is a reply to message #361953]

Sat, 23 January 2021 21:13

Richard RV

Messages: 631
Registered: July 2012
Location: Full-timer for 12 years, ...

Karma:

Senior Member

Yes, it's been done. There should be at least one example on the GMC photo site, and probably also on Mr. ERF's site. The pictures I saw had the piano hinge ~6"(?) back from the front of the hatch. That way most of the bay was opened up and the raised part of the hatch would lean back against the dash and not need any support.

Richard

'77 Birchaven TZE...777; '76 Palm Beach under construction; ‘76 Edgemont waiting its turn

Report message to a moderator

[Message index]

		Piano Hinge on Engine Hatch By: Melbo on Sat, 23 January 2021 16:56
		Re: Piano Hinge on Engine Hatch By: Richard RV on Sat, 23 January 2021 21:13
		Re: [GMCnet] Piano Hinge on Engine Hatch By: Ken Henderson on Sun, 24 January 2021 05:43

Previous Topic:	Jacking up the coach
Next Topic:	[GMCnet] Parts

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 02:35:26 CDT 2024

Total time taken to generate the page: 0.01078 seconds